Elmec Heaters And Controllers

Features:-

• Low watt density heaters are available in brass or SS 304 sheath
• Medium & High watt density heaters are available in SS 304 sheath
• Braided Wire, straight or right angle exit
• Uniform surface temperatures
• Flange type optional Braided wire
• Max temp for SS tube 400oC, for Brass tube 200oC

Applications:-

• Processing machinery
• Injection and Blow Molding
• Hot runner bushings
• Packaging machinery
• For fastening of turbine bolts
• Extruders
• Hot plates, molds & dies
• Food processing machinery
• Medical Equipment
• Shoe Machinery

• Low watt density heaters are available in brass or SS 304 sheath
• Medium & High watt density heaters are available in SS 304 sheath
• Braided Wire, straight or right angle exit
• Uniform surface temperatures
• Flange type optional Braided wire
• Max temp for SS tube 400°C, for Brass tube 200°C

• Processing machinery
• Injection and Blow Molding
• Hot runner bushings
• Packaging machinery
• For fastening of turbine bolts
• Extruders
• Hot plates, molds & dies
• Food processing machinery
• Medical Equipments
• Shoe Machinery

• Excellent heat transfer
• More clearance can be provided for inserting split type cartridge. Heaters compared to standard conventional cartridge heaters
• Can be inserted and removed easily
• Longer life
• Uniform heat transfer
• Available in SS304 SS316 sheaths
• Hot zone up to the tip of the element

• Plastic Processing & Packaging Machinery
• Injection & Blow Molding
• Extruders
• Foundries
• For fastening of Turbine Bolts
• Soldering pots

• Excellent heat transfer
• More clearance can be provided for inserting split type cartridge. Heaters compared to standard conventional cartridge heaters
• Can be inserted and removed easily
• Longer life
• Uniform heat transfer
• Available in SS304 SS316 sheaths
• Hot zone up to the tip of the element

• Plastic Processing & Packaging Machinery
• Injection & Blow Molding
• Extruders
• Foundries
• For fastening of Turbine Bolts
• Soldering pots

• Nickel Chrome / kanthal resistance wire
• Available in Dia 26 mm to and Length up to 3000 mm

• For oils: 1.4 to 4 watts / cm²
• For water: 1.4 to 8 watts / cm²
• For Metals: 2 to 5 watts / cm²
• For air: 1.6 to 3.2 watts / cm²

• Heading Liquids & Gases
• Dryers
• Ovens
• Printing Machinery
• Packing Machinery

We are leading manufacturer, Importers and Service Provider of Flange Heater With Ceramic Cartridge Heaters and our product is made up of good quality.

Elmec Heaters & Controllers a leading manufacturer of industrial heat and control systems, has introduced a Flange Heater with Ceramic Cartridge Heaters.

This heater has low-watt-density, which provides even heating with precise control across the length of a tank. These heaters are specifically designed for heating water, oil, asphalt, bio-diesel, animal fats, and similar liquids.

The chief advantage of this type of heater is that the elements (Ceramic Cartridge Heaters) may be easily removed without draining the tank, requiring minimal or no process downtime.

This is ideal for operations which need 24-hour readiness.

These heaters musty be installed only in horizontal position.

Care should be taken these heaters re always in immersed condition during normal operation.

Should never be switched on in dry condition of the tank.

Other features and cost-saving advantages:

• Each unit may be paired with a compatible control panel, which may be mounted in a remote location or installed directly on the heater, allowing for seamless installation and control.
• A standard, 150# ANSI-style flange provides easy installation with a straightforward mating connection that doesn't require special modifications.
• Each unit comes equipped with a thermostat or thermocouple pocket.
• Powered by electricity, has no open flames, no pollution, no additional piping connections, operates quietly, and provides accurate control.
• These units may be adapted to fit a custom installation which saves on-site fabrication time
  
  

  General Instructions

  • Connection Size: 2 to 14 in., 150# ANSI Flange
  • Immersion Length: 5 to 20 ft
  • Operating Temperatures: 0º to 300ºC
  • Element Rating:2 to 200 kW
  • Voltage: 230 and 415 Vac., 3-Phase

We are leading manufacturer, Importers and Service Provider of Cartridge Heaters and our product is made up of good quality.

These heaters are manufactured in accordance with the international quality standards and are available in various termination styles as well as mounting attachments having electrical terminations on one side.

We are offering these products in order to cater to the requirements of various industries.

For their longer elemental life, excellent performance and capability to withstand extreme temperature range, these are highly appreciated by the clients.

Therefore, these heaters are an ideal substitute of watt density applications and lower operating temperatures.

Applications:-

• Injection molding
• Hot runner molds
• Packaging machinery
• Hot plates and plates
• Extrusion dies

• Plastic processing machinery
• Hot runner mold
• Packaging machinery
• Dies & molds
• Shoe machinery
• Labeling machinery and a lot of other applications.
• Food processing machinery
• Hot Stamping
• Heating gases and liquids

• Sheathing material : SS 304 and SS 316
• Available with inbuilt Thermocouple 'J' or 'K'
• Maximum sheath temperature 800^oC
• Rugged & durable construction
• Highly compacted construction improves heater life and reduces the effect of vibration and shock
• Excellent heat transfer

• Plastic processing machinery
• Hot runner mold
• Packaging machinery
• Dies & molds
• Shoe machinery
• Labeling machinery and a lot of other applications
• Food processing machinery
• Hot Stamping
• Heating gases and liquids

Features:-

• Sheathing material: SS 304 and SS 316
• Available with inbuilt Thermocouple 'J' or 'K'
• Maximum sheath temperature 800^oC
• Rugged & durable construction
• Highly compacted construction improves heater life and reduces the effect of vibration and shock
• Excellent heat transfer